2026 Price Guide · Oahu · Updated September 2026
What Does New Flooring Cost in Hawaii?
A straight-answer price guide for Oahu homeowners — real installed costs, what drives them up, and what nobody tells you until the estimate shows up.
The short version
Carpet, installed$5–$28 / sq ft
Vinyl plank & laminate$7–$18 / sq ft
Engineered hardwood$15–$28 / sq ft
Porcelain & tile$14–$50 / sq ft
Whole house, typical$20k–$50k
* Entry grade through premium. Installed = material plus standard installation; floor prep, removal, moisture mitigation and trim are quoted separately.
50+ yearsOn this island since 1974
100% employee-ownedThe person measuring your floor is an owner
20 mil & AC4Our minimum spec on every plank and laminate
Free estimatesItemized, and yours to keep



Nobody should have to guess what their floor will cost
Most people replace their floors two or three times in a lifetime. That’s not enough reps to build a gut feel for what’s fair, and there’s no sticker on the side of a floor the way there is on a car.
So homeowners do the reasonable thing — they search. And they find national averages calculated for Ohio, on a slab poured in Ohio, installed by a crew that didn’t have to put anything on a barge.
Hawaii is its own market. Freight, humidity, concrete slabs that move, condo association rules, single-wall construction, jobs that can only be worked between 8 and 4 on weekdays — all of it shows up in the number at the bottom of the estimate. A price guide written for the mainland will be wrong here, and usually wrong low, which is worse than being wrong high because it sets you up for a conversation you didn’t want to have.
We’ve been measuring floors on this island since 1974. This page is what we’ve learned, written down: real installed ranges, the things that move the number, and the costs that catch people off guard. No gates, no email required.
One honest caveat. Every range below is a range for a reason. We cannot price your floor from a web page, and you should be skeptical of anyone who says they can. A firm number comes after someone stands in your house with a laser measure and looks at what’s under the floor you have now.
On this page 1. Installed cost per square foot 2. Materials, labor, and the rest 3. Why two quotes can be thousands apart 4. What drives your price up or down 5. Replacing a whole house 6. Vinyl plank, hardwood, carpet, tile 7. The 8 hidden costs 8. Condo & AOAO sound requirements 9. Asbestos in pre-1985 homes 10. Good, Better, Best 11. Typical Oahu projects 12. What’s included in an estimate 13. Frequently asked questions
The short answer
What new flooring costs on Oahu in 2026
These are installed prices — material plus standard professional installation of your new floor.
| Flooring type | Typical installed * | Premium / upgrade range * |
|---|---|---|
| CarpetTackdown, including pad | $5 – $11 / sq ft | $12 – $28 for wool, patterned, or wide-width |
| Luxury vinyl plank & waterproof laminateLVP / LVT and laminate — same install rate · 20 mil & AC4 minimum | $7 – $13 / sq ft | $13 – $18+ for thicker core, wide plank, or glue-down |
| Sheet vinyl | $6 – $11 / sq ft | — |
| Engineered hardwoodGlue-down — what we recommend in Hawaii | $15 – $21 / sq ft | $21 – $28+ for thicker construction, character grade, or exotics |
| Porcelain & ceramic tile | $14 – $28 / sq ft | $22 – $50 for natural stone, mosaic, or patterned layouts |
* What “installed” covers — and what it doesn’t. Every installed price on this page means material plus standard professional installation of your new floor. It does not include removal and disposal of your existing floor, floor preparation, moisture mitigation, underlayment, baseboard or molding, stair work, door cuts, or furniture moving. Those are real costs on many jobs, and we price every one of them openly in The 8 Hidden Costs below — because a page that quietly folded them in would just be a page that lied to you by $4,000.
Ranges reflect actual Oahu residential projects. Where you land inside a range depends mostly on material selection and how much square footage you’re doing at once. Diagonal and herringbone layouts add roughly $1.50–$2.00 per square foot to installation in every category.
Carpet
specials
$3.99 / sq ftRental & realtor turnovers — carpet, cushion and installation in one price
$799 flatAny carpet job under 360 sq ft — carpet, cushion and installation · condos $899
Want your actual number?
A free in-home measure takes about 45 minutes and ends with a written, itemized estimate. No obligation, no pressure, and you keep the estimate whether you buy from us or not.
Instant ballpark
Estimate your flooring project
Answer a few quick questions and get an instant price range for your project. It’s a ballpark, not a quote — your firm number still comes from a free in-home measure.
Where the money actually goes
People tend to assume the material is the project. It isn’t. On a typical Oahu flooring job, the material you picked out in the showroom is a little under half the invoice.
40–60%MaterialThe flooring itself, plus pad or underlayment, adhesive, trim and transitions.
30–50%Installation laborLayout, cutting, setting, seaming, trim work, cleanup and haul-away.
5–25%Prep & removalTearing out the old floor, grinding and leveling the slab, moisture mitigation.
0–15%Site conditionsCondo protocols, phasing, furniture, stairs, door cuts, toilet pulls.
Prep is the swing variable. On a house where the slab is flat and the old carpet comes up clean, prep is close to nothing. On a 1970s home with three generations of adhesive and a slab that’s a half-inch out over ten feet, prep can be a quarter of the job. Nobody — including us — can tell you which one you have until the old floor is off.
What it costs to do a whole house
For a whole-house replacement on Oahu, most homeowners land between $20,000 and $50,000.
Here’s how that breaks down on a real, typical job — a three-bedroom single-family home, existing carpet throughout, standard slab needing basic preparation, new wall base installed.
Same house, different slab
Flat, clean slab — no correction$15,900
Basic prep (shown right)$19,800
Slab tests high — needs mitigation$25,250
This is the spread, and it’s why the measure matters.
1,200 sq ft · luxury vinyl plank over concrete slab
Mid-grade material, carpet removal, basic slab prep, new wall base throughout
| Material — LVP, mid-grade, incl. 10% waste factor | $5,265 |
| Installation labor — locked-in LVP, 1,200 sq ft tier | $6,900 |
| Removal & disposal — tackdown carpet and pad | $780 |
| Floor preparation — basic grind and level | $3,840 |
| Wall base — installation | $2,340 |
| Wall base — material | $345 |
| Bath / kitchen / hallway detail (3 rooms) | $315 |
Project total ≈ $16.50 / sq ft all in $19,800
Note that this total does include removal, prep and trim — the items the per-square-foot table above excludes. That’s the difference between $11.75 a square foot for material and installation and $16.50 a square foot for a finished job.
By material
Luxury vinyl plank & waterproof laminate, installed
LVP is the most-installed floor in Hawaii right now, and the reason is straightforward: it’s waterproof, it handles our humidity without moving, it’s comfortable underfoot, it takes sand and salt without complaint, and the good ones look genuinely like wood.
We install waterproof laminate at the same rate as vinyl plank, which is why they share one price table here. If you’re weighing one against the other, the only thing moving your number is the material — never the labor.
Installed range *
$7 – $13
per sq ft · premium $13–$18+
Engineered hardwood, installed
We will almost always recommend engineered hardwood here, and we want to be clear that it isn’t an upsell — engineered is frequently the less expensive option. It’s a recommendation about physics. Solid wood absorbs and releases moisture with the air around it, and in a climate that swings between 55% and 80% relative humidity, solid planks expand, contract, cup and gap.
Installed range *
$15 – $21
per sq ft · premium $21–$28+
Carpet, installed
Carpet is still the best answer for bedrooms, stairs, and any room where quiet matters — and it’s the most cost-effective way to change how a room feels.
Installed range *
$5 – $11
per sq ft, with pad · wool $12–$28
Tile, installed
Tile is the widest range on this page, and the reason is that tile is the least forgiving material there is. The floor under it has to be dead flat and it has to stay still. Getting it there is where the money goes.
Installed range *
$14 – $28
per sq ft · stone & decorative $22–$50
For condo, townhome and high-rise owners
For homes built before 1985
Every one of these is on our written estimate before you sign.
We’d rather have the uncomfortable conversation on day one than on day fourteen.
Good, Better, Best — how to think about your budget
Most homeowners don’t need the most expensive floor. They need the right floor for how long they’re staying and how hard the room gets used. These project totals are complete — removal, prep and trim included.
Good
$7 – $10
per sq ft installed *
1,200 sq ft home, complete
$10,000 – $15,000
Material — In-stock, proven performers, standard widths
LVP spec — 20-mil wear layer, standard thickness
Prep — Correct what’s needed for the floor to perform
Trim — Reuse base where possible, quarter round at walls
Best for: Rentals, flips, short holds, tight budgets
BetterMost land here
$10 – $15
per sq ft installed *
1,200 sq ft home, complete
$14,000 – $22,000
Material — Wider planks, thicker core, better texture and visuals
LVP spec — 20 mil+, thicker core, attached pad
Prep — Correct to full flatness spec
Trim — New wall base throughout
Best for: Family homes, 10+ year holds
Best
$15 – $28
per sq ft installed *
1,200 sq ft home, complete
$22,000 – $38,000
Material — Engineered hardwood, large-format porcelain, wool
LVP spec — 20 mil+, thickest core, widest format
Prep — Full flatness spec plus moisture system regardless of reading
Trim — New base, custom profiles, painted and finished
Best for: Forever homes, high-traffic households, resale renovations
Good is not “cheap.” Everything we sell at every tier is a product we’ll warranty and install with the same crews — and every vinyl plank at every tier carries a 20-mil wear layer or better. The difference is longevity, acoustics, feel underfoot, and how the floor looks in year ten.
Where we’d tell you to spend
The pad under your carpet, moisture mitigation if the slab tests high, and the installation itself. These determine whether the floor is still good in a decade. You don’t have to spend up for a wear layer here — we already did that for you.
Where we’d tell you to save
Width and visual drama. A 5″ plank and a 9″ plank in the same collection wear the same. The 9″ looks more current and costs meaningfully more. That’s a taste decision, not a performance one — and it’s completely fine to make it either way.
Typical scopes, real numbers
Typical Oahu projects and what they cost
Complete project costs — material, installation, removal, prep and trim.
Kailua single-family, LVP throughout
1,340 sq ft · carpet and sheet vinyl removed · basic slab prep · premium-grade luxury vinyl plank in living, dining, hall and three bedrooms · new wall base throughout
Investment range$20,000 – $25,000
Honolulu high-rise condo
780 sq ft · existing carpet removed · acoustic underlayment to meet association IIC requirement · rigid-core LVP · condo protocol, elevator scheduling and common-area protection
Investment range$13,000 – $18,000
Mililani family home, carpet and vinyl mix
1,150 sq ft · LVP in living, dining, kitchen and hallway · premium carpet with upgraded pad in four bedrooms · new base throughout · furniture moved by AFH
Investment range$15,000 – $20,000
Kaneohe home, engineered hardwood
950 sq ft · glued-down engineered oak, 7″ plank, moisture-barrier adhesive · full slab preparation to flatness spec · stair treads wrapped to match · new base and shoe
Investment range$22,000 – $28,000
Pearl City bathroom and kitchen tile
Two bathrooms and kitchen · existing ceramic demolished and hauled · waterproof membrane and crack isolation · large-format porcelain · toilets pulled and reset
Investment range$14,000 – $19,000
Ewa Beach rental turnover
1,050 sq ft · carpet removed · entry-grade LVP throughout · quarter round at walls · completed in six working days between tenants
Investment range$10,000 – $14,000
Ranges reflect what these scopes typically cost on Oahu. Your project will be priced from your measure, your material selection, and your slab.
What’s included in an American Floor & Home estimate
Included
In-home measure by a trained estimator, at no cost
Written, itemized estimate — material, labor, removal and prep broken out separately
Material and quantity takeoff with appropriate waste factor
Professional installation by our own vetted crews
Removal and disposal of your old flooring, when quoted
Slab moisture testing before any glue-down or floating installation
Standard furniture moving as quoted
Cleanup and haul-away of all job debris
Manufacturer material warranty plus our installation warranty
One point of contact from measure through final walkthrough
Not included unless separately quoted
Subfloor structural repair discovered after demolition
Moisture mitigation, if the slab tests above manufacturer tolerance
Asbestos or lead-containing material abatement (pre-1985 homes — requires a licensed abatement contractor)
Plumbing, electrical, or HVAC modification
Painting beyond wall base
Appliance disconnection and reconnection
Association fees, permits, or certificates of insurance charged by your building
Moving pianos, safes, aquariums, or similar specialty items
How our process works
- Visit a showroom or book a shop-at-home. Our showroom is on Sand Island Access Road in Honolulu. If you’d rather not drive, we’ll bring samples to your house — seeing flooring in your own light is genuinely different from seeing it under showroom lights.
- See it in your room first. Our Roomvo visualizer lets you drop any floor we carry into a photo of your actual room before you commit.
- Free in-home measure. About 45 minutes. We measure, check the subfloor, test slab moisture where relevant, and note anything that will affect the install.
- Written estimate. Itemized, with removal and prep broken out separately so you can compare it to anything else you’ve been given.
- Installation. Scheduled around you. Our crews, not a rotating cast of subs.
- Walkthrough. We don’t consider a job finished until you’ve walked it with us.
Frequently asked questions
The questions our estimators get asked most often, answered the same way we’d answer them at your kitchen table.
How much does flooring cost per square foot in Hawaii?
Installed flooring on Oahu typically runs $5 to $28 per square foot for carpet, $7 to $18 for luxury vinyl plank and waterproof laminate, $15 to $28 for engineered hardwood, and $14 to $50 for tile, entry grade through premium. These figures cover material plus standard installation of the new floor. Removal of your old floor, floor preparation, moisture mitigation, underlayment and new baseboard are quoted separately, because not every project needs them.
Do you have any flooring specials or package pricing?
We run two standing carpet programs. Our Rental & Realtor Program is $3.99 per square foot for carpet, cushion and installation together, built for tenant turnovers and listing prep. Our Room Package covers any carpet job under 360 square feet — carpet, cushion and installation — for a flat $799, or $899 in a condominium, which covers the added building protocol. Both use select in-stock carpet and cushion, and both exclude floor preparation, removal of existing flooring, stairs and furniture moving.
Why is flooring more expensive in Hawaii than on the mainland?
Four reasons: nearly all flooring material ships across an ocean, which adds freight to every square foot; many Oahu homes sit on concrete slabs that require moisture testing and often mitigation; our humidity rules out some materials and demands better-grade versions of others; and condo, high-rise, and restricted-access work adds real labor. Expect Hawaii installed pricing to run meaningfully above national averages.
How much does it cost to replace all the flooring in a house on Oahu?
Most whole-house flooring replacements on Oahu fall between $20,000 and $50,000, depending on square footage, material grade, and how much floor preparation the subfloor needs. A 1,200-square-foot home in mid-grade luxury vinyl plank, including carpet removal, basic slab prep, and new wall base, typically runs around $19,800 — about $16.50 per square foot for a finished job.
What wear layer should I look for in vinyl plank flooring?
At least 20 mil. The wear layer is the clear protective film on top, and it is the best single predictor of how the floor looks in ten years. Much of the market sells 6-mil and 12-mil goods, which are fine in a guest room and wrong in a hallway. We stopped carrying anything under 20 mil, so every vinyl plank in our showrooms is rated for heavy residential and light commercial use. What changes between our grades is overall plank thickness and format, not durability.
What AC rating should laminate flooring have?
AC4 or higher for a family home. AC stands for Abrasion Class, an independent European standard that tests laminate against wear, impact, staining and burns on a scale from AC1 to AC6. AC1 and AC2 are light residential, AC3 is the common retail grade, and AC4 is rated for heavy residential and general commercial traffic. Every laminate we carry is AC4 or better, which is the laminate equivalent of the 20-mil minimum we hold on vinyl plank.
Is luxury vinyl plank a good choice for Hawaii homes?
Yes — it’s the most-installed residential floor in Hawaii for good reason. LVP is waterproof, dimensionally stable in high humidity, comfortable underfoot, and handles sand and salt well. Ask what the wear layer is on anything you’re quoted elsewhere; every plank we carry is 20 mil or better.
Should I install solid hardwood or engineered hardwood in Hawaii?
Engineered hardwood is the better choice in nearly every Hawaii home. Solid wood expands and contracts with humidity, which in our climate leads to cupping and gapping. Engineered hardwood has a real hardwood wear layer over a dimensionally stable core, giving you the same wood surface with far less seasonal movement — often at a lower installed cost.
What is moisture mitigation and do I need it?
Moisture mitigation is a system applied to a concrete slab to block vapor from reaching the flooring above it. You need it when your slab tests above the flooring manufacturer’s moisture tolerance, which is common in Hawaii. It runs about $3.90 to $5.70 per square foot. Installing over a slab that tests high voids the material warranty and typically causes the floor to fail within two to three years.
My condo requires a sound rating — what does that mean for my flooring?
Most Oahu associations regulate hard-surface flooring through an IIC rating (Impact Insulation Class, which measures footstep and impact noise reaching the unit below) and sometimes an STC rating (Sound Transmission Class, for airborne noise). Requirements vary by building: some name a minimum rating, some name approved underlayment products, and some require a tested assembly plus a copy of the test report with your renovation application. Meeting the requirement usually means an acoustic underlayment at $2.95 to $8.60 per square foot, and occasionally added floor preparation underneath it. Check your house rules before you shop, because the answer can change which floor makes sense. We carry compliant systems for the buildings we work in — bring us your house rules and we will tell you what qualifies.
Does my Hawaii home have asbestos under the floor?
If it was built before 1985, quite possibly. Asbestos shows up most often in 9×9 vinyl floor tile, in the felt backing of old sheet vinyl, and in the black mastic or cutback adhesive left on a slab. Material that is intact and undisturbed is generally not releasing fibers — it is grinding, sanding, scraping or breaking it up that does, which is exactly what ordinary floor preparation involves. So on a pre-1985 home, testing comes before demolition. If abatement is needed, it runs roughly $8 to $15 per square foot on top of normal removal and must be performed by a licensed abatement contractor; in some cases leaving the material undisturbed and installing over a barrier is the better and far cheaper path.
How much does it cost to remove old flooring?
Removal ranges from about $0.65 per square foot for tackdown carpet to roughly $9.35 per square foot for natural stone. Glued-down vinyl runs about $4.40 to $4.60, and ceramic tile or glued hardwood runs about $6.30 to $6.50 per square foot. This is one of the largest sources of difference between two quotes on the same house.
Why are two flooring quotes for my house thousands of dollars apart?
Most often because one includes floor preparation and removal and the other doesn’t, or because the two quotes are for different grades of similar-looking material. Ask both companies to break out material, installation labor, removal, and floor prep as separate line items, and ask what the wear layer is on any vinyl plank quoted. If one won’t answer, that tells you something.
Do you charge for an estimate?
No. In-home measures and written estimates are free, with no obligation, and the estimate is yours to keep and compare regardless of whether you buy from us.
How long does a flooring installation take?
A single room is usually one day. A 1,200-square-foot home in vinyl plank is typically three to five working days. Tile takes longer because of curing time, and any job requiring floor preparation or moisture mitigation adds a day or more for those systems to cure before flooring goes down.
Over 50 years on this island. Let’s talk about your floor.
American Floor & Home has been helping Hawaii families choose floors since 1974, and we’re 100% employee-owned — which means the person who measures your house has a stake in how your job turns out.
Come see and feel the material in our showroom, or let us bring the showroom to you.


